Endosteal implants, screw-shaped titanium posts placed directly into the jawbone, are the standard choice and make up the large majority of dental implants placed today; subperiosteal, zygomatic and mini implants exist for the specific situations where an endosteal implant does not fit. Which type is right for a given case comes down almost entirely to how much bone is available and where. This guide explains all four, the materials and connections behind them, and how your dentist chooses among them.
Reviewed by Dr. David Basar, DDS, Advanced Smile Dentistry, Toms River, NJ. Updated November 2026.
This article is part of our complete dental implants guide; here the focus is on the implant types themselves rather than the procedure around them.
What is an endosteal implant?
Endosteal (“within the bone”) implants are the modern standard: a screw-shaped titanium or titanium-alloy post placed directly into the jawbone, left to integrate with the bone over several months, then topped with an abutment and crown. The name describes the placement, not a brand or a single design; most implants your dentist discusses, and virtually every implant covered elsewhere in our guide, are endosteal. They come in a range of diameters and lengths to match the tooth being replaced and the bone available, and they are supported by decades of published outcome data, with long-term survival in well-selected cases running close to 95% or higher at ten years. For the right case, an endosteal implant is almost always the first choice; the other three types in this guide exist for the exceptions.
What is a subperiosteal implant?
A subperiosteal implant is a custom metal framework that sits on top of the jawbone, under the gum tissue, rather than inside the bone itself. Posts extending through the gum support the denture or crown above. This was a mainstream solution in the 1970s and 1980s for patients with too little bone for an endosteal implant and no good way to rebuild it. Modern bone grafting, sinus lifts and zygomatic implants have made subperiosteal implants rare today; they are occasionally still used for carefully selected patients with severe bone loss who cannot have grafting or zygomatic implants, usually planned with a 3D scan and a custom-milled or 3D-printed framework. If a provider recommends one, a second opinion and a clear explanation of why grafting or zygomatic implants are not options is reasonable before proceeding.
What is a zygomatic implant?
A zygomatic implant is a much longer titanium implant, typically 30 to 55mm versus 8 to 16mm for a standard endosteal implant, anchored in the cheekbone (zygoma) rather than the upper jaw. It is reserved for severe upper jaw bone loss where even a sinus lift or ridge augmentation would not provide enough support, and it lets a patient receive a full set of fixed upper teeth without the months of healing a large bone graft would require. A 2023 systematic review and meta-analysis in the International Journal of Implant Dentistry, pooling outcomes across multiple studies with a mean follow-up of about 75 months (over six years), reported a pooled zygomatic implant survival rate of 96.2%. Placement is more involved than a standard implant and is performed by a smaller number of experienced surgeons, usually oral surgeons or prosthodontist-led teams; it is covered in more depth in our guide to full mouth dental implants, since it almost always comes up in that context.
What is a mini dental implant?
Mini dental implants, sometimes called narrow-diameter implants, are under 3mm in diameter (standard endosteal implants typically run 3.5 to 6mm), often placed as a single piece with the abutment built in. Because they are narrower, they can go into ridges too thin for a standard implant without grafting first, which makes them useful for stabilizing a lower denture on a narrow ridge or replacing a single narrow tooth, such as a lower incisor. A consensus review of the published literature found mean survival of 94.3% for one-piece mini implants (1.8 to 2.9mm) over a mean follow-up of about four years, rising to 96.9% to 98.5% for slightly wider two-piece narrow implants (3.0 to 3.5mm); the same review noted a real biomechanical tradeoff, since a narrower post has less resistance to fracture under long-term chewing load, which is why mini implants are matched carefully to the case rather than used as a universal shortcut.
How do the four types compare?
| Endosteal | Subperiosteal | Zygomatic | Mini | |
|---|---|---|---|---|
| Placement | Inside the jawbone | On top of the bone, under the gum | In the cheekbone | Inside the jawbone (narrow site) |
| Typical use today | Default choice for most cases | Rare; severe bone loss, grafting not an option | Severe upper jaw bone loss, full-arch cases | Narrow ridges, denture stabilization, small teeth |
| Diameter | 3.5 to 6mm | Custom framework | Standard diameter, 30 to 55mm long | Under 3mm |
| Reported survival | ~95%+ at 10 years | Limited modern data | ~96% (mean ~6-year follow-up) | 94% to 99% depending on diameter |
| Needs grafting first? | Sometimes | No | Rarely; designed to avoid it | Rarely; designed to avoid it |
What materials are dental implants made from?
Most implants are commercially pure titanium or a titanium alloy (most often titanium-6AI-4V), chosen because titanium bonds directly to living bone, a property called osseointegration, and has decades of safety and outcome data behind it. Zirconia implants, a white ceramic rather than metal, have grown more common as an alternative for patients who specifically want a metal-free option or who have a documented titanium sensitivity; they are a single piece rather than two, which limits some of the angling flexibility a two-piece titanium implant allows, and have less long-term outcome data than titanium, though published results so far are encouraging. Surface treatments such as roughened or chemically modified titanium surfaces speed up and strengthen the bone-to-implant bond and vary by manufacturer; our dental implant brands comparison covers how specific systems differ on surface technology.
What is an implant connection, and does it matter?
The connection is where the abutment attaches to the implant, and the three common designs are external hex (the original design, now mostly used in older systems), internal hex, and conical (friction-fit) connections. In practical terms, this affects how precisely the crown seats, how resistant the screw is to loosening over time, and how easily your dentist can source replacement parts years later if something needs adjusting. It is a detail most patients never need to think about, but it is one more reason an implant system from an established manufacturer, discussed in our brands guide, tends to be the safer long-term choice over an unfamiliar one.
Which implant type is right for you?
For the large majority of patients with a single missing tooth or a few missing teeth and reasonable bone volume, an endosteal implant is the answer, and the conversation is really about size, brand and whether grafting is needed first, covered in our cost guide and our bone grafting guide. A mini implant becomes relevant for a narrow ridge or a lower denture on a budget; a zygomatic implant becomes relevant for severe upper jaw bone loss in a full-arch case; a subperiosteal implant is now rare and worth a second opinion if recommended. A 3D cone-beam CT scan is what actually answers this question for your mouth, rather than any general rule.
How Advanced Smile Dentistry approaches implant type selection
Dr. David Basar is a general dentist with a focus on dental implants, trained at NYU College of Dentistry. At Advanced Smile Dentistry in Toms River, every case starts with a complimentary 3D cone-beam CT scan, and the implant type, diameter and brand are chosen for your bone and your final tooth, not defaulted to one system for every patient. [VERIFY: whether ASD places zygomatic or mini implants in-house, or refers those specific cases; confirm current implant brand(s) in use] Cases needing a zygomatic implant or significant bone rebuilding are planned with, or referred to, the specialists we coordinate with.
Next step
A 3D scan will show which implant type fits your case before anyone talks pricing. Advanced Smile Dentistry offers a complimentary scan and consultation at 2224 Route 37 East, Toms River, NJ 08753; call (732) 608-6478 or book online.
Frequently asked questions
What is an endosteal implant?
A titanium or titanium-alloy screw placed directly into the jawbone, the standard type of dental implant used in the large majority of cases today.
What are the three (or four) types of dental implants?
Endosteal (placed in the jawbone), subperiosteal (resting on top of the bone, now rare), zygomatic (anchored in the cheekbone for severe upper jaw bone loss) and mini or narrow-diameter implants (under 3mm, for narrow ridges).
What is a zygomatic implant used for?
Severe upper jaw bone loss where even a sinus lift would not provide enough support, most often in full-arch cases. Pooled survival in long-term studies is around 96%.
Are mini dental implants as strong as standard implants?
They have good published survival (94% to 99% depending on exact diameter) but less resistance to fracture under heavy, long-term chewing load than a standard-diameter implant, so they are matched to specific cases rather than used universally.
Are titanium or zirconia implants better?
Titanium has decades more outcome data and more design flexibility; zirconia is a reasonable metal-free alternative with promising but shorter-term published results. Most patients without a specific reason to avoid metal choose titanium.
Do all dental implants need bone grafting first?
No. Many standard cases need no graft at all, and zygomatic and mini implants were specifically designed to work around bone that would otherwise need grafting.
Sources
- Brennand Roper K, et al. Survival rate of zygomatic implants for fixed oral maxillary rehabilitations: a systematic review and meta-analysis. International Journal of Implant Dentistry. 2023.
- International Team for Implantology (ITI). Consensus statement on narrow-diameter implants. iti.org Academy Consensus Database.
- Howe MS, Keys W, Richards D. Long-term (10-year) dental implant survival: a systematic review and sensitivity meta-analysis. Journal of Dentistry. 2019;84:9-21.
- American Academy of Implant Dentistry. Implant materials and designs. aaid-implant.org